2024 maintenance schedule
2024 Acura Integra A-Spec Service Requirements & Maintenance Schedule
The 2024 Acura Integra A-Spec is a front-wheel-drive compact sports sedan powered by a 1.5L turbocharged 4-cylinder engine.
Last updated
June 18, 2026
Reviewed for service schedule clarity.
The 2024 Acura Integra A-Spec is a front-wheel-drive compact sports sedan powered by a 1.5L turbocharged 4-cylinder engine . The A-Spec is an appearance and equipment package, available with either a CVT (Continuously Variable Transmission) or a 6-speed manual transmission. The mechanical maintenance requirements remain identical across all non-Type S trims .
This guide provides the complete factory service schedule based on the 2024 Acura Integra Owner's Manual, including the Maintenance Minder system, detailed code definitions, fluid specifications, and severe-condition requirements .
Key Takeaways
- The 2024 Integra uses the Maintenance Minder system instead of fixed odometer intervals . The vehicle's computer monitors driving conditions and displays alphanumeric codes (A, B, 1-7) when specific services are due. There is no traditional "every 30,000-mile" service schedule.
- The 1.5L turbo engine uses a timing chain, NOT a belt. The vehicle has a "100k+ miles no scheduled tune-ups" design . Code 4 covers only spark plugs and valve clearance inspection—not timing belt replacement.
- Premium fuel (91 octane or higher) is recommended for the 1.5L engine to achieve peak performance.
- Brake fluid replacement is strictly time-sensitive. If a Maintenance Minder indicator does not appear within 36 months after the previous reset of item 7, replace the brake fluid every 3 years regardless of mileage .
- Transmission fluid intervals differ by transmission type and driving conditions :
- CVT models driven regularly in mountainous/low-speed conditions: change every 25,000 miles (40,000 km)
- Manual transmission models under same conditions: change every 37,500 miles (60,000 km)
- If no service message appears within 12 months of reset, change the engine oil at least once per year .
- The 2024 Integra has a service interval warning system (maintenance reminder) as standard equipment .
Engine & Drivetrain Specifications
The 2024 Acura Integra A-Spec is powered by a turbocharged 1.5L 4-cylinder engine across all A-Spec trims :
| Specification | Value |
|---|---|
| Engine | 1.5L turbocharged 4-cylinder (VTEC Turbo) |
| Horsepower | 200 hp |
| Torque | 192 lb-ft |
| Transmission | CVT (standard) or 6-speed manual |
| Drivetrain | Front-wheel drive (FWD) |
| Fuel requirement | Premium recommended (91 octane) |
| Tune-up interval | 100k+ miles no scheduled tune-ups |
Fluid Specifications
| Fluid | Specification |
|---|---|
| Engine oil | SAE 0W‑20 premium-grade synthetic oil, API-certified |
| CVT fluid | Acura CVT Fluid (HCF-2) exclusively |
| Manual transmission fluid | Acura MTF |
| Brake/Clutch fluid | Acura Heavy Duty Brake Fluid DOT 3 |
| Engine coolant | Acura Long Life Antifreeze/Coolant Type 2 (premixed) |
Timing Chain vs. Belt: The L15 engine uses a timing chain that does not require periodic replacement. The vehicle has a "100k+ miles no scheduled tune-ups" design . Code 4 on the Maintenance Minder applies only to spark plugs and valve clearance inspection—not timing belt replacement.
Understanding the Maintenance Minder System
The 2024 Acura Integra does not have a traditional fixed‑mileage maintenance schedule. Instead, Acura employs a Maintenance Minder system that monitors vehicle operating conditions and calculates when service is required .
How the System Works
When the engine oil life reaches 15%, the system displays a service message on the driver information interface every time you set the power mode to ON .
| Oil Life Remaining | Message Displayed | Recommended Action |
|---|---|---|
| 15% | Maintenance Due Soon | Service should be scheduled soon; oil approaching end of life |
| 5% | Maintenance Due Now | Maintenance should be performed as soon as possible |
| 0% (Negative Distance) | Maintenance Past Due | Service is overdue – schedule immediately. Negative distance blinks |
Oil Life Percentage Display
Based on engine operating conditions, the remaining engine oil life is calculated and displayed as a percentage :
| Displayed Oil Life (%) | Calculated Range (%) |
|---|---|
| 100 | 100-91 |
| 90 | 90-81 |
| 80 | 80-71 |
| 70 | 70-61 |
| 60 | 60-51 |
| 50 | 50-41 |
| 40 | 40-31 |
| 30 | 30-21 |
| 20 | 20-16 |
| 15 | 15-11 |
| 10 | 10-6 |
| 5 | 5-1 |
| 0 | 0 |
Typical oil change intervals range from 5,000 to 7,500 miles depending on driving conditions and oil type . Under normal conditions, the Maintenance Minder typically triggers between 7,500-10,000 miles. Severe conditions could trigger alerts in a range from 3,000-4,999 miles .
Viewing Maintenance Minder Information
To display Maintenance Minder information :
- Set the power mode to ON (do not start the engine)
- Rotate the right selector wheel until the Maintenance Minder screen appears
- The oil life percentage and due maintenance codes will display on the driver information interface
Fallback Time Requirements
The following requirements apply independently of the Maintenance Minder system :
| Condition | Required Action |
|---|---|
| No maintenance message within 12 months of reset | Change engine oil at least once per year |
| No item 7 indicator within 36 months of reset | Replace brake fluid every 3 years |
| Driving in dusty conditions | Replace air cleaner element every 15,000 miles (24,000 km) |
| Driving in urban areas with high soot | Replace dust/pollen filter every 15,000 miles (24,000 km) |
Maintenance Minder Codes
The Maintenance Minder communicates service needs through alphanumeric codes. A code consists of a main item (A or B) optionally followed by sub‑item numbers (1 through 7) .
Main Item Codes (A, B)
| Code | Required Service |
|---|---|
| A | Replace engine oil |
| B | Replace engine oil and oil filter; inspect front and rear brakes; check expiration date for tire repair kit bottle; inspect tie rod ends, steering gearbox, and boots; inspect suspension components; inspect driveshaft boots; inspect brake hoses and lines (including ABS/VSA); inspect all fluid levels and condition of fluids; inspect exhaust system; inspect fuel lines and connections |
Sub-Item Codes (1-7)
| Code | Service Description | Notes / Severe Conditions |
|---|---|---|
| 1 | Rotate tires | Standard tire rotation |
| 2 | Replace air cleaner element; replace dust/pollen filter; inspect drive belt | Dusty conditions: replace air cleaner every 15,000 miles. High-soot urban areas: replace dust/pollen filter every 15,000 miles |
| 3 | Replace transmission fluid | Mountain/low-speed driving requires more frequent changes (see severe conditions below) |
| 4 | Replace spark plugs; inspect valve clearance | NOTE: Timing belt replacement does NOT apply (timing chain engine). 100k+ mile tune-up interval |
| 5 | Replace engine coolant | Standard coolant replacement interval |
| 7 | Replace brake fluid | Every 3 years regardless of mileage. If no item 7 indicator appears within 36 months after reset, replace brake fluid at that time |
Valve Adjustment Note
Adjust the valves during services A, B, 1, 2, or 3 only if they are noisy .
Example Code Combinations
| Displayed Code | Services Required |
|---|---|
| A1 | Oil change + tire rotation |
| B2 | Oil/filter change + comprehensive inspection + air filters + drive belt inspection |
| A3 | Oil change + transmission fluid replacement |
| B7 | Comprehensive service + brake fluid replacement |
Engine Oil Change Guidance
Factory Requirements
| Specification | Detail |
|---|---|
| Recommended oil | SAE 0W‑20 premium-grade synthetic oil with API Certification Seal |
| Oil change trigger | Maintenance Minder code A or B (when oil life reaches 15%) |
| Maximum time interval | If no service indicated within 12 months, change oil at least once per year |
| Oil filter | Replace at every oil change (code B includes filter change) |
| Reference interval | 5,000 to 7,500 miles depending on driving conditions and oil type |
How to Check Oil Level
- Park on level ground and wait at least 3 minutes after engine shutdown
- Pull out the dipstick and wipe completely clean
- Reinsert fully, then remove again
- Oil level should be between the upper and lower marks
Owner Guidance
- Acura Genuine Motor Oil is recommended, though any synthetic oil of the same viscosity grade and API certification is acceptable
- Your Acura does not require any oil additives
- Check the engine oil level at least once per month
Transmission Service
The 2024 Integra A-Spec is available with either a Continuously Variable Transmission (CVT) or a 6-speed manual transmission. Service requirements differ by transmission type and driving conditions .
CVT (Continuously Variable Transmission)
| Specification | Detail |
|---|---|
| Transmission type | CVT (standard on A-Spec) |
| Specified fluid | Acura CVT Fluid (HCF-2) exclusively |
| Standard interval | Follow Maintenance Minder code 3 |
| Severe mountain driving interval | 25,000 miles (40,000 km) |
Critical Warning: Using any transmission fluid other than Acura CVT Fluid (HCF-2) can damage the transmission. Driving in mountainous areas at very low speeds requires more frequent fluid changes .
> Severe condition: If you regularly drive your vehicle in mountainous areas at very low vehicle speeds, this results in higher transmission temperature. Under this condition, have the transmission fluid changed every 25,000 miles (40,000 km) .
6-Speed Manual Transmission
| Specification | Detail |
|---|---|
| Transmission type | 6-speed manual (available on A-Spec) |
| Specified fluid | Acura MTF (Manual Transmission Fluid) |
| Standard interval | Follow Maintenance Minder code 3 |
| Severe mountain driving interval | 37,500 miles (60,000 km) |
> Severe condition: For manual transmission models regularly driven in mountainous areas at very low speeds, have the transmission fluid changed every 37,500 miles (60,000 km) .
Spark Plugs & Ignition
| Specification | Detail |
|---|---|
| Replacement trigger | Maintenance Minder code 4 |
| Inspect valve clearance | Code 4; adjust only if noisy |
| Timing belt replacement | Not applicable – Integra uses timing chain |
| Tune-up interval | 100k+ miles no scheduled tune-ups |
Owner Guidance: The Integra's turbocharged engine places additional stress on spark plugs. If you notice rough idle, reduced fuel economy, or hesitation before the Maintenance Minder indicates replacement, have the plugs inspected early. The engine is designed to last over 100,000 miles without scheduled tune-ups .
Engine Coolant Service
| Specification | Detail |
|---|---|
| Replacement trigger | Maintenance Minder code 5 |
| Coolant type | Acura Long Life Antifreeze/Coolant Type 2 (premixed 50/50) |
Owner Guidance: Do not add straight antifreeze or water; the factory coolant is premixed. If Acura coolant is unavailable, a major brand of non‑silicate coolant may be used as a temporary replacement; return to Genuine Acura coolant as soon as possible.
Brake/Clutch Fluid Replacement
| Specification | Detail |
|---|---|
| Specified fluid | Acura Heavy Duty Brake Fluid DOT 3 |
| Replacement trigger | Maintenance Minder code 7, or if no code 7 appears within 36 months after reset (every 3 years regardless of mileage) |
| Check frequency | Monthly; keep level between MIN and MAX marks |
| Temporary substitute | DOT 3 or DOT 4 from a sealed container |
| DOT 5 warning | NOT compatible – brake fluid marked DOT 5 is not compatible with your vehicle's braking system and can cause extensive damage |
| Clutch fluid | Manual transmission models use the same reservoir for clutch fluid |
Why it's critical: Brake fluid is hygroscopic – it absorbs moisture from the air over time. This moisture lowers the fluid's boiling point (potential brake fade under hard braking) and promotes internal corrosion of the brake system.
Owner Guidance: A complete system flush (draining old fluid from each caliper) is required. Topping off the reservoir is not sufficient. If the brake fluid level is at or below the MIN mark, have a dealer inspect the vehicle for leaks or worn brake pads as soon as possible.
Using Non-Acura Brake Fluid: Using any non-Acura brake fluid can cause corrosion and decrease the longevity of the system. Have the brake system flushed and refilled with Acura Heavy Duty Brake Fluid DOT 3 as soon as possible if a substitute is used .
Drive Belt Inspection
| Specification | Detail |
|---|---|
| Inspection trigger | Maintenance Minder code 2 (inspect drive belt) |
| Replacement | Replace if cracked, frayed, glazed, or making a squealing noise on startup |
Owner Guidance: The Integra uses a serpentine drive belt that powers the alternator, air conditioning compressor, and other accessories. Most drive belts last between 60,000 and 90,000 miles, but the Maintenance Minder indicates when inspection is needed.
Air Filters (Engine & Cabin)
| Filter | Replacement Trigger | Severe Conditions Note |
|---|---|---|
| Engine air cleaner element | Maintenance Minder code 2 | If you drive in dusty conditions, replace every 15,000 miles (24,000 km) regardless of Maintenance Minder |
| Cabin air filter (dust/pollen filter) | Maintenance Minder code 2 | If you drive primarily in urban areas with high soot concentrations (industry, diesel vehicles), replace every 15,000 miles (24,000 km) |
Owner Guidance: Both filters are inexpensive and can be replaced without special tools. The cabin air filter is typically located behind the glove box; replacing it annually improves interior air quality and HVAC performance.
Resetting the Maintenance Minder Display
After performing the required maintenance service, the engine oil life display must be reset. Failure to reset results in the system showing incorrect maintenance intervals, which can lead to serious mechanical problems .
Reset Procedure :
- Set the power mode to ON (do not start the engine)
- Roll the right selector wheel until the Maintenance Minder screen is displayed
- Press and hold the right selector wheel for about 10 seconds to enter reset mode
- Roll the right selector wheel to select a maintenance item to reset, or select All due items (you can also select Cancel to end the process)
- Press the right selector wheel to reset the selected item
- Repeat from step 4 for other items you wish to reset
> Note: The dealer will reset the engine oil life display after completing required maintenance service. If someone other than a dealer performs maintenance service, reset the Maintenance Minder display yourself .
Monthly & Pre-Drive Checks
As outlined in the 2024 Integra Owner's Manual, perform these checks regularly :
| Frequency | Check Item |
|---|---|
| Monthly | Brake/Clutch fluid level (keep between MIN and MAX marks) |
| Monthly | Tire pressure (including spare); examine tread for wear and foreign objects |
| Monthly | Exterior lights operation |
| Every 6 months | Wiper blade condition |
| Pre-drive / Before long trips | Engine oil level; windshield washer fluid; tires for damage; fluid leaks under vehicle |
Precision Certified Vehicles: Some 2024 Integra A-Spec models may be offered as Precision Certified, which includes first scheduled maintenance free and a 182-point inspection .
Severe Driving Conditions
The Maintenance Minder system automatically adapts to driving conditions, but the following severe condition requirements apply independently of the Maintenance Minder :
| Condition | Required Action |
|---|---|
| Mountain driving at very low speeds (CVT) | Change CVT fluid every 25,000 miles (40,000 km) |
| Mountain driving at very low speeds (Manual) | Change manual transmission fluid every 37,500 miles (60,000 km) |
| Dusty driving conditions | Replace air cleaner element every 15,000 miles (24,000 km) |
| Urban driving with high soot concentration | Replace dust/pollen filter every 15,000 miles (24,000 km) |
| No service message for 12 months | Change engine oil regardless of mileage |
| No brake fluid indicator (item 7) for 36 months | Replace brake fluid every 3 years |
Scheduled Maintenance Summary
Since the Integra uses the Maintenance Minder system instead of fixed intervals, the table below shows reference intervals—always follow your vehicle's displayed Maintenance Minder codes:
| Component | Reference Interval | Maintenance Minder Code |
|---|---|---|
| Engine oil & filter | Up to 12 months (5,000-7,500 miles typical) | A or B |
| Tire rotation | Per Maintenance Minder (approx. 7,500-10,000 miles) | 1 |
| Engine air filter | 30,000 miles (15,000 miles dusty conditions) | 2 |
| Cabin air filter | 15,000-30,000 miles (more often in urban areas) | 2 |
| CVT fluid | Per Maintenance Minder; 25,000 miles (mountain driving) | 3 |
| Manual transmission fluid | Per Maintenance Minder; 37,500 miles (mountain driving) | 3 |
| Spark plugs | Per Maintenance Minder (100k+ mile design) | 4 |
| Valve clearance | Inspect during A/B services; adjust only if noisy | 4 |
| Engine coolant | Per Maintenance Minder | 5 |
| Brake fluid | Every 3 years (time-based, independent of codes) | 7 |
| Tune-up design | 100k+ miles no scheduled tune-ups | — |
Maintenance questions
2024 Acura Integra A-Spec FAQs
How often should I change the oil in my 2024 Acura Integra A-Spec?+
The oil should be changed every 5,000 to 7,500 miles, depending on driving conditions and the type of oil used . Follow the Maintenance Minder system—when code A or B appears (when oil life reaches 15%), service is due. If no service is indicated within 12 months after display reset, change the oil at least once per year . Use SAE 0W‑20 premium-grade synthetic oil.
Does the 2024 Acura Integra A-Spec have a timing belt or timing chain?+
It has a timing chain. The 1.5L turbo engine does not require periodic timing belt replacement—the vehicle has a 100k+ miles no scheduled tune-ups design . Code 4 on the Maintenance Minder applies only to spark plugs and valve clearance inspection.
How often should I change the transmission fluid on my A-Spec?+
Follow Maintenance Minder code 3 . However, if you regularly drive in mountainous areas at very low speeds:
- CVT models: Change fluid every 25,000 miles (40,000 km)
- Manual transmission models: Change fluid every 37,500 miles (60,000 km)
How often should I replace the brake fluid?+
If a Maintenance Minder indicator does not appear within 36 months after the display for item 7 is reset, replace the brake fluid every 3 years . Use Acura Heavy Duty Brake Fluid DOT 3. DOT 5 fluid is not compatible and can cause extensive damage.
What type of CVT fluid does the Integra A-Spec use?+
The CVT requires Acura CVT Fluid (HCF-2) exclusively . Using any other fluid can damage the transmission.
What fuel does the 2024 Acura Integra A-Spec require?+
The 2024 Acura Integra is designed to run on premium unleaded gasoline with an octane rating of 91 or higher .
Can I use an independent shop for maintenance?+
Yes. Maintenance may be done by any qualified automotive repair establishment or individual using parts certified to EPA standards. This does not void your warranties. Keep all receipts as proof of completion.
How do I reset the Maintenance Minder after an oil change?+
Set power mode to ON, roll the right selector wheel to the Maintenance Minder screen, press and hold the right selector wheel for about 10 seconds to enter reset mode, select "Reset" or "All due items," and press to confirm .
What do the Maintenance Minder codes mean?+
- A: Replace engine oil
- B: Replace engine oil and filter + comprehensive inspections
- 1: Rotate tires
- 2: Air filters + drive belt inspection
- 3: Transmission fluid
- 4: Spark plugs + valve clearance (timing belt does NOT apply)
- 5: Engine coolant
- 7: Brake fluid (every 3 years)
How often should I check my tire pressure?+
Check tire pressure monthly, including the spare, and examine the tread for wear and foreign objects . The TPMS will alert you to significant under-inflation but is not a substitute for regular manual checks.
When should the spark plugs be replaced?+
Spark plugs are replaced when Maintenance Minder code 4 appears. The vehicle has a 100k+ miles no scheduled tune-ups design , so replacement may not be needed until high mileage depending on driving conditions.
How often should the air filters be replaced in dusty conditions?+
If you drive in dusty conditions, replace the engine air cleaner element every 15,000 miles (24,000 km) regardless of the Maintenance Minder . For urban areas with high soot concentrations, replace the cabin dust/pollen filter at the same interval .
Is there a difference between A-Spec and standard Integra maintenance?+
No. The A-Spec is an appearance and equipment package; the mechanical components (engine, transmission options, suspension) are the same as the standard Integra . The maintenance schedule, fluid specifications, and all service intervals are identical across all non-Type S trims.
What is the tune-up interval for the 2024 Integra?+
The 2024 Acura Integra has a 100k+ miles no scheduled tune-ups interval . This means under normal conditions, no major engine tune-up services (spark plugs, valve adjustment, etc.) are scheduled until high mileage.
How do I improve the ride quality of my Integra?+
To enhance the ride quality of your 2024 Acura Integra, consider upgrading the tires, adjusting the suspension settings, and maintaining proper tire pressure .