2024 maintenance schedule
2024 Acura Integra Service Schedule & Maintenance Guide
The 2024 Acura Integra combines modern engineering with a legendary nameplate, available with either a 1.5L turbocharged 4-cylinder engine (CVT or...
Last updated
June 18, 2026
Reviewed for service schedule clarity.
The 2024 Acura Integra combines modern engineering with a legendary nameplate, available with either a 1.5L turbocharged 4-cylinder engine (CVT or 6-speed manual) or a high-performance 2.0L turbocharged 4-cylinder engine (6-speed manual only) for the Type S trim .
This guide provides the complete factory service schedule based on the 2024 Acura Integra Owner's Manual, including the Maintenance Minder system, fluid specifications, and severe-condition requirements .
Key Takeaways
- The 2024 Integra uses the Maintenance Minder system instead of fixed odometer intervals . The vehicle's computer monitors driving conditions and displays alphanumeric codes (A, B, 1-7) when specific services are due. There is no traditional "every 30,000-mile" service schedule.
- The 1.5L and 2.0L turbo engines use timing chains, NOT belts. The vehicle has a 100k+ miles no scheduled tune-ups design. Code 4 covers only spark plugs and valve clearance inspection—not timing belt replacement .
- Premium fuel (91 octane or higher) is required for the 2.0L Type S and recommended for the 1.5L engine to achieve rated horsepower and prevent engine knock .
- Brake fluid replacement is strictly time-sensitive. If a Maintenance Minder indicator does not appear within 36 months after the previous reset, replace the brake fluid every 3 years regardless of mileage .
- Transmission fluid intervals differ by transmission type and driving conditions :
- CVT models driven regularly in mountainous/low-speed conditions: change every 25,000 miles (40,000 km)
- Manual transmission models under same conditions: change every 37,500 miles (60,000 km)
- If no maintenance message appears within 12 months of reset, change the engine oil at least once per year .
Engine & Drivetrain Overview
The 2024 Acura Integra is available with multiple powertrain configurations :
| Specification | Integra (Base/A-Spec) | Integra Type S |
|---|---|---|
| Engine | 1.5L turbocharged 4-cylinder (L15) | 2.0L turbocharged 4-cylinder (K20C1) |
| Horsepower | 200 hp | 320 hp |
| Torque | 192 lb-ft | 310 lb-ft |
| Transmission | CVT (standard) or 6-speed manual | 6-speed manual |
| Drivetrain | Front-wheel drive (FWD) | Front-wheel drive (FWD) |
| Fuel requirement | Premium recommended (91 octane) | Premium required (91 octane) |
| Tune-up interval | 100k+ miles no scheduled tune-ups | 100k+ miles no scheduled tune-ups |
Timing Chain vs. Belt: Both the L15 and K20C1 engines use timing chains that do not require periodic replacement. The vehicle has a "100k+ miles no scheduled tune-ups" design . Code 4 on the Maintenance Minder applies only to spark plugs and valve clearance inspection—not timing belt replacement.
Understanding the Maintenance Minder System
The 2024 Acura Integra does not have a traditional fixed‑mileage maintenance schedule. Instead, Acura employs a Maintenance Minder system that monitors vehicle operating conditions and calculates when service is required .
How the System Works
When the oil life reaches 15%, the system displays a service message on the driver information interface every time you set the power mode to ON .
| Oil Life Remaining | Message Displayed | Recommended Action |
|---|---|---|
| 15% | Maintenance Due Soon | Service should be scheduled soon; oil approaching end of life |
| 5% | Maintenance Due Now | Maintenance should be performed immediately |
| 0% | Maintenance Past Due | Service is overdue – schedule immediately; negative distance appears after driving beyond limit |
Oil Life Percentage Display
The system displays the calculated remaining engine oil life in percentages :
| Displayed Oil Life (%) | Calculated Range (%) |
|---|---|
| 100 | 100-91 |
| 90 | 90-81 |
| 80 | 80-71 |
| 70 | 70-61 |
| 60 | 60-51 |
| 50 | 50-41 |
| 40 | 40-31 |
| 30 | 30-21 |
| 20 | 20-16 |
| 15 | 15-11 |
| 10 | 10-6 |
| 5 | 5-1 |
| 0 | 0 |
Fallback Time Requirements
The following requirements apply independently of the Maintenance Minder system :
| Condition | Required Action |
|---|---|
| No maintenance message within 12 months of reset | Change engine oil at least once per year |
| No item 7 indicator within 36 months of reset | Replace brake fluid every 3 years |
| Driving in dusty conditions | Replace air cleaner element every 15,000 miles (24,000 km) |
| Driving in urban areas with high soot | Replace dust/pollen filter every 15,000 miles (24,000 km) |
Maintenance Minder Codes
The Maintenance Minder communicates service needs through alphanumeric codes. A code consists of a main item (A or B) optionally followed by sub‑item numbers (1 through 7) .
Main Item Codes (A, B)
| Code | Required Service |
|---|---|
| A | Replace engine oil |
| B | Replace engine oil and oil filter; inspect front and rear brakes; check parking brake adjustment; check expiry date for tire repair kit bottle; inspect tie rod ends, steering gearbox, and boots; inspect suspension components; inspect driveshaft boots; inspect brake hoses and lines (including ABS/VSA); inspect all fluid levels and condition of fluids; inspect exhaust system; inspect fuel lines and connections |
Sub-Item Codes (1-7)
| Code | Service Description | Notes / Severe Conditions |
|---|---|---|
| 1 | Rotate tires | Standard tire rotation |
| 2 | Replace air cleaner element; replace dust and pollen filter; inspect drive belt | If you drive in dusty conditions, replace air cleaner element every 15,000 miles (24,000 km). If you drive in urban areas with high soot concentrations, replace dust/pollen filter every 15,000 miles (24,000 km) |
| 3 | Replace transmission fluid | Driving in mountainous areas at very low speeds requires more frequent changes (see severe conditions below) |
| 4 | Replace spark plugs; inspect valve clearance | NOTE: Timing belt replacement does NOT apply to Integra (timing chain engine). Adjust valves only if they are noisy during services A, B, 1, 2, or 3 |
| 5 | Replace engine coolant | Standard coolant replacement interval |
| 7 | Replace brake fluid | Every 3 years (36 months) regardless of mileage. If no item 7 indicator appears within 36 months after reset, replace brake fluid at that time |
Example Code Combinations
| Displayed Code | Services Required |
|---|---|
| A1 | Oil change + tire rotation |
| B2 | Oil/filter change + comprehensive inspection + air filters + drive belt inspection |
| A3 | Oil change + transmission fluid replacement |
| B7 | Comprehensive service + brake fluid replacement |
Engine Oil Change Guidance
Factory Requirements
| Specification | Detail |
|---|---|
| Recommended oil | SAE 0W‑20 premium-grade synthetic oil for 1.5L; SAE 5W‑30 for 2.0L Type S (verify with owner's manual) |
| Oil change trigger | Maintenance Minder code A or B (when oil life reaches 15%) |
| Maximum time interval | If no service indicated within 12 months, change oil at least once per year |
| Oil filter | Replace at every oil change (code B includes filter change) |
| Reference interval | 5,000 to 7,500 miles depending on driving conditions and oil type |
How to Check Oil Level
- Park on level ground and wait at least 3 minutes after engine shutdown
- Pull out the dipstick and wipe completely clean
- Reinsert fully, then remove again
- Oil level should be between the upper and lower marks
Owner Guidance
- Acura Genuine Motor Oil is recommended, though any synthetic oil of the same viscosity grade and API certification is acceptable
- Your Acura does not require any oil additives
- Check the engine oil level at least once per month
- More frequent oil changes are recommended if you haul heavy loads, drive in dusty areas, enjoy off-roading, or go at low speeds on long distance trips
Transmission Service
The 2024 Integra is available with either a Continuously Variable Transmission (CVT) or a 6-speed manual transmission. Service requirements differ based on transmission type and driving conditions .
CVT (Continuously Variable Transmission)
| Specification | Detail |
|---|---|
| Transmission type | CVT (standard on 1.5L models) |
| Specified fluid | Acura CVT Fluid (HCF-2) exclusively |
| Standard interval | Follow Maintenance Minder code 3 |
| Severe mountain driving interval | 25,000 miles (40,000 km) |
Critical Warning: Using any transmission fluid other than Acura CVT fluid can damage the transmission. Do not use automatic transmission fluid (ATF) in a CVT.
> Severe condition: If you regularly drive your vehicle in mountainous areas at very low vehicle speeds, this results in higher transmission temperature. Under this condition, have the transmission fluid changed every 25,000 miles (40,000 km) .
6-Speed Manual Transmission
| Specification | Detail |
|---|---|
| Transmission type | 6-speed manual (available on 1.5L; standard on Type S 2.0L) |
| Specified fluid | Acura Manual Transmission Fluid (MTF) |
| Standard interval | Follow Maintenance Minder code 3 |
| Severe mountain driving interval | 37,500 miles (60,000 km) |
> Severe condition: For manual transmission models regularly driven in mountainous areas at very low speeds, have the transmission fluid changed every 37,500 miles (60,000 km) .
Spark Plug Replacement
| Specification | Detail |
|---|---|
| Replacement trigger | Maintenance Minder code 4 |
| Inspect valve clearance | Code 4; adjust only if noisy during services A, B, 1, 2, or 3 |
| Timing belt replacement | Not applicable – Integra uses timing chain |
| Tune-up interval | 100k+ miles no scheduled tune-ups |
Owner Guidance: The Integra's turbocharged engines place additional stress on spark plugs. If you notice rough idle, reduced fuel economy, or hesitation before the Maintenance Minder indicates replacement, have the plugs inspected early. Use only OEM-specified spark plugs (NGK or Denso equivalents).
Engine Coolant Service
| Specification | Detail |
|---|---|
| Replacement trigger | Maintenance Minder code 5 |
| Coolant type | Acura Long Life Antifreeze/Coolant Type 2 (premixed 50/50) |
Owner Guidance: Do not add straight antifreeze or water; the factory coolant is premixed. If Acura coolant is unavailable, a major brand of non‑silicate coolant may be used as a temporary replacement; return to Genuine Acura coolant as soon as possible. Turbocharged engines place additional thermal stress on cooling system components—inspect hoses regularly for swelling or cracking.
Brake Fluid Replacement
| Specification | Detail |
|---|---|
| Specified fluid | Acura Heavy Duty Brake Fluid DOT 3 |
| Replacement trigger | Maintenance Minder code 7, or if no code 7 appears within 36 months after reset |
| Check frequency | Monthly; keep level between MIN and MAX marks on the reserve tank |
| Temporary substitute | DOT 3 or DOT 4 from a sealed container |
| DOT 5 warning | NOT compatible – brake fluid marked DOT 5 is not compatible with your vehicle's braking system and can cause extensive damage |
| Clutch fluid | Manual transmission models use the same reservoir for clutch fluid |
Why it's critical: Brake fluid is hygroscopic – it absorbs moisture from the air over time. This moisture lowers the fluid's boiling point (potential brake fade under hard braking) and promotes internal corrosion of the brake system.
Owner Guidance: A complete system flush (draining old fluid from each caliper) is required. Topping off the reservoir is not sufficient. If the brake fluid level is at or below the MIN mark, have a dealer inspect the vehicle for leaks or worn brake pads as soon as possible .
Drive Belt Inspection
| Specification | Detail |
|---|---|
| Inspection trigger | Maintenance Minder code 2 (inspect drive belt) |
| Replacement | Replace if cracked, frayed, glazed, or making a squealing noise on startup |
Owner Guidance: The Integra uses a serpentine drive belt that powers the alternator, air conditioning compressor, and other accessories. Most drive belts last between 60,000 and 90,000 miles, but the Maintenance Minder indicates when inspection is needed.
Air Filters (Engine & Cabin)
| Filter | Replacement Trigger | Severe Conditions Note |
|---|---|---|
| Engine air cleaner element | Maintenance Minder code 2 | If you drive in dusty conditions, replace every 15,000 miles (24,000 km) regardless of Maintenance Minder |
| Cabin air filter (dust and pollen filter) | Maintenance Minder code 2 | If you drive in urban areas with high soot concentrations (industry, diesel vehicles), replace every 15,000 miles (24,000 km) |
Owner Guidance: Both filters are inexpensive and can be replaced without special tools. The cabin air filter is typically located behind the glove box; replacing it annually improves interior air quality and HVAC performance. A clogged engine air filter can reduce fuel economy and turbocharger performance.
Resetting the Maintenance Minder Display
After performing the required maintenance service, the engine oil life display must be reset. Failure to reset results in the system showing incorrect maintenance intervals.
Reset Procedure :
- Press the information display's Settings button
- Select Vehicle Settings on the interface dial, then press Enter
- Scroll to Maintenance Info and select it
- Scroll to Maintenance Reset and press Enter
- When prompted, press Enter again to select Reset
- The oil life display returns to 100%
> Note: The dealer will reset the engine oil life display after completing required maintenance service. If someone other than a dealer performs maintenance service, reset the engine oil life display yourself.
Monthly & Pre-Drive Checks
As outlined in the 2024 Integra Owner's Manual, perform these checks regularly :
| Frequency | Check Item |
|---|---|
| Monthly | Brake/Clutch fluid level (keep between MIN and MAX marks) |
| Monthly | Tire pressure (including spare); examine tread for wear and foreign objects |
| Monthly | Exterior lights operation |
| Every 6 months | Wiper blade condition |
| Pre-drive / Before long trips | Engine oil level; windshield washer fluid; tires for damage; fluid leaks under vehicle |
> Note: Service at a dealer is not mandatory to keep your warranties in effect. Maintenance may be performed by any qualified automotive repair establishment or individual .
Severe Driving Conditions
The Maintenance Minder system automatically adapts to driving conditions, but the following severe condition requirements apply independently of the Maintenance Minder :
| Condition | Required Action |
|---|---|
| Mountain driving at very low speeds (CVT) | Change CVT fluid every 25,000 miles (40,000 km) |
| Mountain driving at very low speeds (Manual) | Change manual transmission fluid every 37,500 miles (60,000 km) |
| Dusty driving conditions | Replace air cleaner element every 15,000 miles (24,000 km) |
| Urban driving with high soot concentration | Replace dust/pollen filter every 15,000 miles (24,000 km) |
| No service message for 12 months | Change engine oil regardless of mileage |
| No brake fluid indicator (item 7) for 36 months | Replace brake fluid every 3 years |
Maintenance questions
2024 Acura Integra FAQs
How often should I change the oil in my 2024 Acura Integra?+
The oil should typically be changed every 5,000 to 7,500 miles, depending on driving conditions and the type of oil used . Follow the Maintenance Minder system—when code A or B appears (when oil life reaches 15%), service is due. If no service is indicated within 12 months after reset, change the oil at least once per year. The 1.5L engine uses SAE 0W‑20 premium-grade synthetic oil; the 2.0L Type S uses SAE 5W‑30 .
Does the 2024 Acura Integra have a timing belt or timing chain?+
It has a timing chain on both engine options. The 1.5L (L15) and 2.0L (K20C1) engines do not require periodic timing belt replacement—the vehicle has a 100k+ miles no scheduled tune-ups design . Code 4 on the Maintenance Minder applies only to spark plugs and valve clearance inspection.
How often should I change the transmission fluid?+
Follow Maintenance Minder code 3 . However, if you regularly drive in mountainous areas at very low speeds:
- CVT models: Change fluid every 25,000 miles (40,000 km)
- Manual transmission models: Change fluid every 37,500 miles (60,000 km)
How often should I replace the brake fluid?+
If a Maintenance Minder indicator does not appear within 36 months after the display for item 7 is reset, replace the brake fluid every 3 years . Use Acura Heavy Duty Brake Fluid DOT 3 . DOT 5 fluid is not compatible and can cause extensive damage .
What fuel does the 2024 Acura Integra require?+
The 2.0L Type S requires premium unleaded (91 octane or higher). The 1.5L engine recommends premium for optimal performance, though regular may be used with reduced performance .
How often should I replace the air filters in dusty conditions?+
If you drive in dusty conditions, replace the engine air cleaner element every 15,000 miles (24,000 km) regardless of the Maintenance Minder . For urban areas with high soot concentrations, replace the cabin dust/pollen filter at the same interval.
What type of CVT fluid does the Integra use?+
The CVT requires Acura CVT Fluid exclusively. Using any other fluid can damage the transmission .
How do I reset the Maintenance Minder after an oil change?+
Press the information display's Settings button. Select Vehicle Settings > Maintenance Info > Maintenance Reset, then confirm Reset. The oil life returns to 100% .
What do the Maintenance Minder codes mean?+
- A: Replace engine oil
- B: Replace engine oil and filter + comprehensive inspections
- 1: Rotate tires
- 2: Air filters + drive belt inspection
- 3: Transmission fluid
- 4: Spark plugs + valve clearance (timing belt does NOT apply)
- 5: Engine coolant
- 7: Brake fluid (every 3 years)
When should the spark plugs be replaced?+
Spark plugs are replaced when Maintenance Minder code 4 appears. The vehicle has a 100k+ miles no scheduled tune-ups design . The typical interval is approximately 60,000-100,000 miles depending on driving conditions.
How do I check the brake fluid level?+
The brake fluid level should be between the MIN and MAX marks on the side of the reserve tank . Check monthly. For manual transmission models, the same reservoir serves the clutch fluid .
How often should I check my tire pressure?+
Check tire pressure monthly, including the spare, and examine the tread for wear and foreign objects . The TPMS will alert you to significant under-inflation but is not a substitute for regular manual checks.
What is the typical oil change interval?+
While the Maintenance Minder is the official guide, oil changes are typically needed every 5,000 to 7,500 miles, depending on driving conditions and oil type . Severe conditions (dusty areas, heavy loads, low-speed long trips) may require more frequent changes.
Can I service my Integra at an independent shop without voiding the warranty?+
Yes. Maintenance may be done by any qualified automotive repair establishment or individual. Service at a dealer is not mandatory to keep your warranties in effect. Keep all receipts as proof of completion .
Are there any recalls for the 2024 Acura Integra?+
Recall information is not included in this maintenance guide. Check the NHTSA website or contact an Acura dealer with your VIN for any open recalls.