2010 Bentley Continental Supersports Service Schedule & Maintenance Guide

The 2010 Bentley Continental Supersports is a rare, high-performance grand tourer, representing the pinnacle of the first-generation Continental GT line. Powered by a twin-turbocharged 6.0L W12 engine producing 621 horsepower and 590 lb-ft of torque, it was the most powerful Bentley ever offered when new . Only 1,207 examples of the Supersports coupe were produced, making meticulous, specialist-led maintenance essential for preserving its performance, reliability, and investment value .

Key Takeaways

• Primary Service Interval: Bentley requires scheduled maintenance every 12 months or 16,000 km (approximately 10,000 miles), whichever comes first . This is the foundational requirement for all 2010 Continental Supersports models.
• Engine & Performance: The vehicle is powered by a twin-turbocharged 6.0L W12 (engine code BWRB) producing 621 hp, linked to a ZF 6HP six-speed automatic transaxle and permanent all-wheel drive .
• Fluid Capacities: The engine oil service fill capacity is 12.5 liters . The transmission fluid capacity is 11.2 liters .
• Spark Plugs: A full set of 12 spark plugs is required. The genuine Bentley part number is 101905600B, also compatible with an NGK aftermarket option (PZFR6J-11) .
• Specialist Care: A comprehensive service history from a Bentley main dealer or a recognised specialist is critical for preserving the vehicle's substantial value .

Factory Recommended Service Schedule

Primary Service Interval

Bentley's official service schedule is straightforward: maintenance is required once a year, or every 10,000 miles, whichever comes first . The first year of Bentley service was complimentary for original owners .

Annual / 10,000-Mile Service Contents

At each scheduled visit, the following baseline items are typically performed:

• Engine Oil & Filter Change: Replaced with Bentley-specification fully synthetic oil .
• Tire Rotation: All four tires rotated for even wear .
• Cabin Pollen Filter: Replaced .
• Windshield Wipers: Replaced as needed .
• Key Fob Battery: Replaced .
• Brake System: Comprehensive inspection of brake pads and discs .
• Fluid Levels: All vehicle systems checked and topped up .
• Leakage Inspection: Visual inspection for fluid leaks .
• Suspension: Comprehensive inspection of all components, including the adaptive air suspension .

Following the vehicle inspection, owners are informed of any components not meeting specification, at which point they can approve any necessary repairs.

Service History Example

A well-maintained 2010 Continental Supersports demonstrates the expected service pattern, with regular servicing by Bentley main dealers and specialists . One documented example shows the following service history:

• 07/12/2009 – PDI – Harwoods Bentley
• 02/06/2010 – Service – Harwoods Bentley (1,860 miles)
• 15/03/2012 – Service – Bentley Hadley Green (6,084 miles)
• 15/03/2013 – Service – Bentley Hadley Green (16,086 miles)
• 05/11/2014 – Service – Jack Barclay (21,884 miles)
• 20/10/2016 – Service – Harwoods Bentley (26,278 miles)
• 27/04/2018 – Service – Bradshaw Bentley (28,353 miles)
• 07/08/2020 – Service – Bradshaw Bentley (29,097 miles)
• 20/07/2022 – Service – Bradshaw Bentley (30,357 miles)
• 20/07/2024 – Service – Bradshaw Bentley (33,902 miles)
• 27/07/2025 – Major Service – Silver Dawn (37,150 miles)

This demonstrates the value of consistent, documented annual servicing.

Engine Oil Change Guidance

Oil Specifications and Capacities

The 6.0L W12 engine (engine code BWRB) requires high-quality fully synthetic oil that meets Bentley's strict factory standards . The engine has a service fill capacity of 12.5 liters .

Oil Change Interval

• Factory recommendation: Every 12 months or 16,000 km (10,000 miles) .
• Conservative owner guidance: Never exceed 12 months for an oil change, even if the mileage is low, as synthetic oil can degrade over time. For vehicles driven primarily in extreme climates or for short urban journeys, many specialists recommend more frequent changes.

Spark Plug Timing

Replacement Interval and Part Specifications

The 2010 Continental Supersports uses a full set of spark plugs. The 6.0L W12 engine requires 12 spark plugs. The genuine Bentley spark plug part number is 101905600B, which fits 2009-2011 Supersports models . An NGK aftermarket option (PZFR6J-11) is also compatible .

Regular inspection and replacement at the recommended interval is essential for maintaining optimal ignition performance, fuel efficiency, and engine health. Fouled spark plugs can cause decreased fuel economy, increased emissions, engine misfires, rough idle, and difficulty starting the car .

Transmission Service

Transmission Specifications

The 2010 Continental Supersports is equipped with a ZF 6HP six-speed automatic transaxle . The transmission fluid capacity is approximately 11.2 liters .

Service Considerations

Given the high-performance nature of the Supersports, a full transmission fluid and filter service should be considered at higher mileages. If shifting becomes rough, delayed, or is accompanied by unusual noises, have the transmission inspected immediately by a Bentley specialist.

Brake System

Carbon Ceramic Brakes

The 2010 Continental Supersports features cross-drilled and ventilated ceramic-composite rotors at each corner, with Bentley-branded calipers . These high-performance components provide exceptional stopping power but require specialist attention and can be expensive to replace.

Brake Fluid

Brake fluid should be checked at every service and replaced according to the manufacturer's schedule. Given the vehicle's performance capability, adherence to the replacement schedule is essential for safety and optimal braking performance.

Service Documentation and Specialist Care

Service Documentation

Maintaining a comprehensive service history is critical for preserving the vehicle's resale value . The official owner's manual for the Continental Supersports (2009-2011) carries part number 3W7 012 003 NS and provides the definitive maintenance schedule . The official service information system for the 2010 model is IETIS (Integrated Electronic Technical Information System), which contains the Workshop and Service Schedule manuals .

Specialist Care

Given the vehicle's complexity and limited production, service should be performed by certified Bentley technicians or independent specialists with the right equipment and genuine parts. A comprehensive service history from a recognised Bentley specialist carries significant weight in the market .